Descrizione
The voltage converter is used to convert 48 V DC to 220240 V AC. The 19″ 4U rack version is intended for installation in switchboards, technology cabinets, and backup or energy systems where a centralized power converter with an RS485 communication interface is required.
Technical specifications
Model: IPS-DTA10000-482-4U
Device type: DC/AC voltage converter
Input voltage: 48V DC
Operating input voltage range: 4058.8 VDC
Starting voltage range: 42-57 VDC
AC bypass input: 230 VAC
Output voltage: 230 VAC
Output frequency: 50 Hz
Output voltage shape: pure sine wave
Rated power: 10 kVA
Active power: 8000 W
Design: 19″ rack
Height: 4U
Communication interface: RS485
Bypass switching time: up to 5 ms
Insulation strength between input and output: 1500 VAC for 1 minute
Noise level at a distance of 1 m: up to 65 dB
Operating temperature: -20°C to +50°C
Operating humidity: 0-90%, non-condensing
Maximum operating altitude: 2000 m
Efficiency in inverter mode at 80% resistive load: at least 85%
Protection functions: input undervoltage and overvoltage protection, output overload and short circuit protection
Overload capacity: 100-120% for 60 s
Overload capacity: 121-150% for 10 s
Functions and features
Converts 48V DC voltage to AC mains voltage to power connected devices.
The 19″ rack design allows installation in standardized cabinets and distribution boards.
The output with a pure sine wave is designed to power devices sensitive to the quality of the supply voltage.
The integrated RS485 interface allows connection to a higher-level monitoring or control system.
By-pass with a short switching time supports operation in applications where power continuity is important.
The design is intended for power applications with a 48 V DC power bus.
Ideal for
Backup power systems with 48 V battery blocks.
Telecommunications and data installations in 19″ rack.
Industrial and technological switchboards.
Power systems requiring conversion from 48 V DC to 220240 V AC.
Central power supply for devices in rack assemblies.
Package contents
48 V DC / 220240 V AC voltage converter in 19″ 4U design
Why choose this product?
It combines 10 kVA / 8000 W power with a 19″ rack design.
Supports communication via RS485 for integration into technical systems.
The stated pure sine wave output is suitable for a wide range of AC loads.
The listed protection functions address overvoltage, undervoltage, overload and short circuit.
Operating parameters include an industrially applicable range of temperatures and humidity without condensation.
Installation and operating instructions
Installation must be carried out in a 19″ rack or other structure with adequate load capacity and ensured heat dissipation.
It is necessary to observe the correct polarity and dimensioning of the 48 V DC supply.
The AC connection must comply with local electrical regulations.
Connect the RS485 communication interface only with compatible devices and suitably routed cabling.
Operate the device in an environment free from moisture condensation and within the prescribed temperature range.
Safety notice
The device operates with dangerous input and output voltages. There is a risk of electric shock, short circuit and damage to connected devices.
Installation, connection and commissioning must be carried out by a person with appropriate electrical qualifications.
Before any intervention, disconnect the DC and AC power supply and verify that there is no voltage.
Incorrect polarity connection on the DC input or incorrect connection of the AC output may result in damage to the device.
Do not cover the ventilation holes and do not install the device in an area without sufficient cooling.
Do not operate the device in an environment with condensing humidity, water or conductive dust.
Recensioni
Ancora non ci sono recensioni.