Descrizione
The power cable with a USB-A 2.0 connector on one side and two free wires on the other side is used to supply DC power to a device or module with a direct wire connection. The 100 cm version is available in white and black. The cable is suitable for power applications where a simple connection from a USB port to two wires without data communication is required.
Technical specifications
Connector: USB-A male
Connector standard: USB 2.0
Cable length: 100 cm
Number of wires: 2
Wire color: red and black
Cable sheath color: white or black
Output type: loose wires without terminations
Designation: power cable for DC power supply
Rated voltage: max. 24 V
Conductor material indicated on the base: tinned copper
Insulation material indicated on the base: PVC
Current: max. 2 A (24V) max. 6A (5V)
Polarity marking in the picture: red wire positive, black wire negative
Functions and features
The USB-A connector allows power connection from a compatible USB source or port.
Two separate output wires are designed for direct connection to a device, terminal block or power input.
The cable is intended for power transmission, not data connection.
The PVC sheath ensures mechanical protection of the conductors and flexibility of the cable.
Available in two color options, it can be matched to the installation or device.
Ideal for
Powering smaller DC devices from a USB source
LED applications and lighting elements powered by DC voltage
CCTV accessories
Small fans and small electronic devices
Service, development and assembly use
Package contents
1x USB-A power cable with two free wires, length 100 cm
Why choose this product?
A simple solution for converting from a USB-A connector to a two-wire power supply.
The 100 cm length provides a greater installation reach than short jumpers.
Loose wires allow you to customize the termination method to suit your specific application.
Both white and black versions are available for different types of installations.
Installation and operating instructions
Before connecting, verify the polarity of the wires and the requirements of the powered device.
Only use the cable to power the device with the appropriate DC voltage.
The free ends of the wires must be properly insulated or terminated in a suitable manner during assembly.
Connect only to a source that matches the required voltage and current draw of the device.
Safety notice
Incorrect polarity connection may cause damage to the powered device.
Uninsulated, loose conductors must not come into contact with each other, as there is a risk of a short circuit.
Do not use a cable with damaged insulation, connector, or wires.
Perform installation and connection with the power disconnected.
If the cable is integrated into the device or fixed installation, the connection should be made by a person with appropriate expertise.
Recensioni
Ancora non ci sono recensioni.