Descrizione
The ROKO SND04-P inductive proximity sensor is used for non-contact detection of metal objects in industrial and automation applications. The version with PNP NO output is intended for direct current power supply 1030 V DC and for installation in places where switching is required depending on the presence of a metal target. The sensor is equipped with a connection cable and mounting holes in the sensor body.
Technical specifications
Model: ROKO SND04-P
Sensor type: inductive proximity sensor
Supply voltage: 10-30 V DC
Output: PNP NO
Switching state: normally open
Detection distance: 4 mm
Protection level: IP67
For detecting metal objects
3-wire connection
Wire colors marked on the label: BN +1030 V, BK PNP NO, BU 0 V
Sensor body with mounting holes
Indicator LED on the front
Declared circuit protection: reverse polarity protection and output short circuit protection
Functions and features
Non-contact sensing of a metal target without mechanical wear of the switching part
PNP NO output logic for direct connection to DC-powered control circuits
Compact square design suitable for installation in machines, fixtures and automation units
Hard-wired cable for direct electrical connection
Front status indication via LED
IP67 protection for use in operating environments with increased demands on dust and moisture resistance
Ideal for
Industrial automation
Positional detection of metal parts
Sensing the presence of metal parts on machines and conveyors
Integration into control and signaling circuits
Installation in devices with 1030 V DC power supply
Package contents
Proximity sensor ROKO SND04-P with connection cable
Mounting screws and nuts
Why choose this product?
Clearly marked model and wiring directly on the sensor label
Combination of 10-30V DC power supply and PNP NO output for general control applications
Inductive sensing principle designed for detecting metal objects
IP67 protection and integrated protection circuits listed by the manufacturer on product materials
Design with mounting holes allows for a solid mechanical attachment
Installation and operating instructions
Before connecting, verify the correct polarity of the power supply and the function of the individual wires according to the markings BN, BK and BU.
Install the sensor so that it detects only the metal target in the working area.
Route the cable away from places where there is a risk of mechanical damage, pulling or kinking.
Perform installation with the power disconnected.
When integrating into a control system, verify the input’s compatibility with the PNP NO signal.
Safety notice
The product is an electrical component for DC power supply; incorrect connection may cause damage to the sensor or downstream circuits.
Do not connect the sensor to a voltage outside the range of 1030 V DC.
Avoid shorting wires and do not install under voltage.
Installation in industrial equipment must be carried out by a qualified person.
When used in safety-critical functions, it is necessary to verify whether the sensor is intended for such use in the device documentation.
Recensioni
Ancora non ci sono recensioni.