Descrizione
Textile adhesive tape with a fabric and polyethylene backing and a pressure-sensitive rubber adhesive is intended for bundling cables, temporary fixation, sealing and general assembly work indoors and outdoors. Thanks to its flexible structure, it easily adapts to uneven surfaces and is also suitable for applications where water resistance and moisture resistance are required.
Technical specifications
Type: textile tape (carpet/duct/gaffer), single-sided adhesive
Material: polyethylene + fabric (gauze), surface with hotmelt layer
Adhesive: rubber, pressure sensitive
Thickness: 0.27mm
Adhesion: 0.36 kN/m
Initial tack: 10#
Holding power: 60 min
Tensile strength: 2.5 kN/m
Heat resistance: 120 °C
Length: 30 m or 50 m option
Color options: black, red, silver, yellow, brown, blue, green, pink, gray, white (some colors must be requested)
Functions and features
Waterproof and moisture-resistant design for use in more demanding conditions
Good flexibility and surface adaptation, also suitable for uneven substrates
Suitable for bundling and fixing cable bundles
Possibility of tearing off by hand (typical for textile tapes)
Residue-free removal depends on surface type, application time and environmental conditions
Surface warning: depending on the underlying materials, it may not be suitable for some varnished/painted surfaces
Ideal for
Bundling and organizing cabling in installations and distribution boards
Temporary fixation and assembly work during service interventions
Sealing and repairs (e.g. pipes, hoses) as part of routine maintenance
Marking and color differentiation of lines and bundles (according to the selected color)
Installation and fixation of equipment where gaffer tape is required
Package contents
1× roll of textile adhesive tape in the selected color and length
Why choose this product?
Combination of textile backing and pressure-sensitive rubber adhesive for universal use
Good adhesion and mechanical resistance for fixation and bundling
Waterproof design suitable for both interior and exterior use
Multiple color options available for technical marking and organization
Installation and operating instructions
Clean and degrease the surface before application to improve adhesion.
Apply the tape with adequate pressure over the entire bonding area.
When removing, proceed smoothly and at a low angle; for sensitive surfaces, we recommend testing compatibility on a small area
Removability and residual tack may change depending on time, temperature and substrate type.
Recensioni
Ancora non ci sono recensioni.