Descrizione
Audio cable V(H)03VH-H 2×1.00 mm² B/C is a flat two-core cable designed for audio and signal applications. Thanks to two copper conductors with the same cross-section, it is suitable for simple connection in low-voltage and audio distributions where shielding is not required.
Technical specifications
Type designation: V(H)03VH-H
EAN: 8591043319485
Sales unit: 1 m
Number of cores: 2
Nominal conductor cross-section: 1 mm²
Conductor material: copper
Cable geometry: flat
Core insulation: PVC
Outer sheath material: without outer sheath
Nominal voltage U0: 300 V
Nominal voltage U: 300 V
Protective conductor: no
Halogen-free design according to EN IEC 60754-2: no
Halogen-free design: no
Low smoke emission according to IEC 61034-2: no
Oil resistance: no
Shielding: no
Standard packaging: 100 m
Functions and properties
The two-core design allows simple signal routing or power connection in corresponding applications.
The flat shape of the cable facilitates routing in places with limited space.
Copper conductors ensure electrical conductivity suitable for the given cable cross-section.
PVC insulation of individual cores ensures basic electrical separation of the conductors.
The cable is not shielded, therefore it is not intended for installations requiring increased protection against electromagnetic interference.
The cable does not contain a protective conductor.
Ideal for
Audio connection with two-core wiring.
Signal distributions without the requirement for shielding.
Simple internal cable installations within the range of parameters specified for this cable.
Service and assembly use where a flat two-core cable with copper conductors is required.
Package contents
1 m of audio cable V(H)03VH-H 2×1.00 mm² B/C.
Why choose this product
Clearly specified two-core construction with a cross-section of 1 mm².
Copper conductors and PVC insulation correspond to common use in audio and signal applications.
The flat design is suitable for clear cable routing.
Sale by 1 m allows ordering the length according to the installation needs.
Installation and operation instructions
Use the cable only within the range of its specified electrical parameters.
Before connection, check for mechanical damage to the insulation and proper stripping of the conductors.
During installation, prevent damage to the insulation by sharp edges, excessive tension, or improper fastening.
For use in circuits with hazardous voltage, professional installation by a person with appropriate electrical qualification is required.
Safety warnings
The cable has a nominal voltage of 300 V, therefore there is a risk of electric shock when used in electrical circuits.
Before assembly, modification, or connection, the respective circuit must be safely disconnected from the power supply.
Incorrect connection, damaged insulation, or overloading of conductors can cause a short circuit, overheating, or damage to the equipment.
The cable is not equipped with a protective conductor and is not shielded; do not use it in applications that require these properties.
Recensioni
Ancora non ci sono recensioni.