Air Conditioner Installation Kit Mono – 5 meters of 1/4 and 1/2 Copper with Wall Bracket-Spedizione veloce

Descrizione

Installation Kit for Mono-Split Air Conditioner

5m ¼ Pre-insulated Copper Pipe

2 Self-sealing Fittings ¼

5m 1/2 Pre-insulated Copper Pipe

2 Self-sealing Fittings 1/2

5m Condensate Drain Pipe

5m 4×1.5mm² Four-core Cable

1 Wall Bracket for Mono-Split Unit (105kg)

Characteristics of Copper Pipe:
ACR annealed (R220), mechanical properties, dimensions, tolerances, and eccentricities comply with UNI EN 12735-1.
Suitable for refrigerants R407C and R410A, with internal cleaning and dehydration using inert gas, overall residue max 0.034 g/m², and sealed ends according to ASTM B280.
Insulation:
Cross-linked polyethylene foam insulation with the following technical values:
Thermal conductivity at 40°C 0.040 W/m*K
Water vapor diffusion resistance factor (anti-condensation) 10000
Fire reaction class 1
Usage temperature -80°/+120°C
CFC-free
White extruded polyethylene (LDPE) outer film, flame-retardant additive, adhering to the foam to ensure high anti-condensation performance, excellent abrasion and tear resistance.
Characteristics of the Bracket:

Load capacity 105 kg

2 anti-disengagement safety stops

Includes leveling bubble

2 anti-vibration pads to be placed between the bracket and the wall

3 anchors with screws and washers

4 anti-vibration feet to be placed between the air conditioner and the bracket for perfect soundproofing

Characteristics of Self-Sealing Fittings:
Metallic seal and operating pressure up to 140 bar make this product particularly suitable for refrigeration and conditioning systems using new low environmental impact refrigerants to connect pipes, valves, tanks, and line components in general.
The biting ring acts like a clamp on the outer surface of the pipe to resist pressure and provide an effective seal.
Characteristics:
Fluid temperature: -40°C to +150°C
Maximum working pressure: 140 bar
Compatible with traditional 45° flare fittings
No need to calibrate or flare the end of the pipe, nor to tighten with a torque wrench
Approvals:
CE (PED, RoHS, REACH), EAC
Superior performance to DIN 8912 and SAE J513 requirements for traditional 45° flare fittings
Patented system
Characteristics of Condensate Drain Pipe:
For concealed or channel installations
HD polyethylene, UV-resistant
Characteristics of Electrical Cable:
Four-core cable for single-phase 220V air conditioner power supply
Product Code: KI.5.1/4-1/2