Descrizione
The FOTEK SP-05P inductive proximity sensor is a non-contact sensor designed for detecting metal objects in automation and control applications. The design in a board housing allows for installation in limited space and frontal sensing in the vertical direction. The SP-05P model, according to the above marking, operates as a DC sensor with a PNP output and a NO switching function.
Technical specifications
Model: SP-05P
Series: PS Series Inductive Proximity Sensor
Manufacturer: FOTEK
Design type: plate type, plate design
Sensing principle: inductive proximity sensor
Output method: PNP
Output state: NO
Sensing distance: 5.0 mm
Mounting method: flush
Scanning direction: vertical
Supply voltage: 1030 VDC
Maximum output current: 150 mA
Maximum current consumption: 10 mA
Residual voltage: < 0.1 V
Arrester current: < 0.8 mA
Power supply ripple: < 20% Vp-p
Hysteresis: < 10% of sensing distance
Temperature drift: < 10 m/°C
Voltage drift: < 1 m/V
Protection circuit: short circuit and reverse polarity protection
Working temperature: -25 °C to +80 °C
Operating humidity: 35% to 95% RH
Protection: IP67
Color of the sensing surface for the PNP variant: green
Wire connections: brown +10 to 30 VDC, blue 0 V, black output
Sensor body dimensions: 30.5 × 18.0 × 10.0 mm
Cable length: 200cm
Switching frequency: 800 Hz
Functions and features
Non-contact inductive detection of metal objects.
Board housing for fixed mounting using mounting holes.
Recessed sensing design.
PNP output with NO switching function.
Three-wire DC connection according to the attached diagram.
Short circuit and reverse polarity protection on the DC side of the variant.
IP67 protection for use in industrial environments.
Ideal for
Detection of metal parts in machine and automation assemblies.
Position signaling of moving mechanisms.
Use in fixtures, conveyors and assembly workplaces.
Integration into control circuits with 1030 VDC power supply.
Package contents
Inductive proximity sensor FOTEK SP-05P with connection cable
Why choose this product?
Clearly identified model with stated output type, sensing distance and power supply range.
Compact board design with dimensional drawing for assembly design.
PNP NO output suitable for common DC control applications.
Protective features and IP67 protection support use in technical installations.
Installation and operating instructions
Follow the wiring diagram for the PNP variant: brown for positive supply, blue for 0 V, black as output.
Mount the sensor in accordance with the flush mounting method specified.
When designing the mounting, use the dimensional drawing of the specific SP-05P model.
Do not exceed the specified supply voltage range or maximum output current.
Safety notice
Make electrical connections with the power supply disconnected.
Incorrect wiring may result in damage to the sensor or connected equipment.
Observe the polarity of the power supply and output load according to the wiring diagram.
Install the sensor in an industrial device in such a way as to avoid mechanical damage to the cable and sensor body.
Installation into control systems and machinery should be carried out by a person with appropriate electrical qualifications.
Recensioni
Ancora non ci sono recensioni.